Plastic Limit, Liquid Limit and Undrained Shear Strength of Soil—Reappraisal

The concept that plasticity index of soils can be defined as a range of water contents producing a 100-fold variation in undrained shear strength has been experimentally verified with the help of a large number of tests on soils of diverse nature. This has led to the redefinition of the plastic limit as the water content at which undrained shear strength is around 170 kN/m2. Undrained shear strength of a soil at the liquid limit can be considered to be around 1.7 kN/m2. Accordingly, both the liquid limit and the plastic limit have been determined in the present work by a single consistent method, i.e., the Swedish fall cone method. The undrained shear strength-water content relationship has been found to be log-linear for a wide range of water contents beginning from lower than the plastic limit to higher than the liquid limit. This resulted in the formulation of an expression for predicting undrained shear strength of a remolded soil at any water content based solely on its liquid limit and plastic limit.     

下一代SONET/SDH对网络部署的冲击

面对电信业的低迷,运营商和设备制造商都捏紧了钱袋,想方设法少花钱多办事。这就意味着,必须改进现有传输网(见图1),使话音和数据传输效率更高。从网络部署的角度来看,运营商需要:用一些有效的方法,将多协议数据转换到SONET/SDH信道上;用一种灵活的带宽适应机制,使SONET/SDH信道大小与在其中传输的数据的需求相一致;用一种机制,灵活并以理想的动态方式改变整个SONET/SDH网络的信道带宽。这就要求集成电路供应商提供有助于在SONET/SDH上有效传输数据的芯片。虽然现在有多种SONET/SDH信息包(PoS)产品,但是它们的转换效率都太…     

Transparent ultra-long-haul DWDM networks with "broadcast-and-select" OADM/OXC architecture

We describe an experimental realization of ultra-long-haul (ULH) networks with dynamically reconfigurable transparent optical add-drop multiplexers (OADMs) and optical cross-connects (OXCs). A simple new approach to dispersion management in ULH dense-wavelength-division-multiplexing (DWDM) transparent optical networks is proposed and implemented, which enables excellent transmission performance while avoiding dispersion compensation on a connection-by-connection basis. We demonstrate "broadcast-and-select" node architectures that take full advantage of this method. Our implementation of signal leveling ensures minimum variations of path-averaged power among the wavelength-division-multiplexing (WDM) channels between the dynamic gain-equalizing nodes and results in uniform nonlinear and spontaneous-emission penalties across the WDM spectrum. We achieve 80/spl times/10.7-Gb/s DWDM networking over 4160 km (52 spans/spl times/80 km each) of all-Raman-amplified symmetric dispersion-managed fiber and 13 concatenated OADMs or 320/spl times/320 wavelength-port OXCs with 320-km node spacing. The WDM channels use 50-GHz grid in C band and the simple nonreturn-to-zero (NRZ) modulation format. The measured Q values exhibit more than a 1.8-dB margin over the forward-error correction threshold for 10/sup -15/ bit-error-rate operation. We compare these results with point-to-point transmission of 80/spl times/10-Gb/s NRZ WDM signals over 4160 km without OADM/OXC and provide detailed characterization of penalties due to optical signal-to-noise-ratio degradation, filter concatenation, and crosstalk.     

Characterization of ZnS:Cu, Br electroluminescent phosphor prepared by new route

Synthesis of electroluminescent ZnS:Cu, Br phosphor by a number of routes has been presented along with their brightness-voltage, brightness-frequency, brightness-waveform and spectral energy distribution studies. The sample fired in N₂ atmosphere with aluminum and bromine shows predominantly green emission with a peak around 530 nm whereas the sample prepared under H₂S and HBr shows the broadest emission spectrum with multiple peaks. These peaks may arise out of different possible bands of copper, self-activated luminescence of ZnS and association of copper with some of the donor levels formed because of the higher reactivity of HBr. All the samples have been found to obey the relation B=B₀ exp.(−b/V^0.5) which has been discussed using bipolar tunnel emission model. The frequency variation of brightness is linear. Samples containing bromine show multiple secondary peaks indicating that bromine helps in formation of multiple shallow traps.     

Nanoweb Formation: 2D Self‐Assembly of Semiconductor Gallium Oxide Nanowires/Nanotubes

This paper reports a method to produce networks of crystalline gallium oxide comprised of one‐dimensional (1D) nanostructures. Because of the unique arrangement of wires, these crystalline networks are termed as ‘nanowebs’. Nanowebs are of great technological interest since they contain wire densities of the order of 10⁹ cm^–2. A possible mechanism for the fast self‐assembly of crystalline metal oxide nanowires involves multiple nucleation and coalescence via oxidation–reduction reactions at the molecular level. The preferential growth of nanowires parallel to the substrate enabled them to coalesce into regular polygonal networks. The individual segments of the polygonal network consist of both nanowires and nanotubules of β‐gallium oxide. Individual wire properties contribute to a nanoweb’s overall capacity and the implications for devices based on nanowebs are expected to be enormous.     

Anhydrous esterification of myristic acid with propylene: Ion exchange resin and acid-treated clay as catalysts

Anhydrous esterification of myristic acid with propylene was carried out in the temperature range of 110–145°C and pressure from 190–195 psig in the presence of Amberlyst-15 (cation exchange resin) and Filtrol-24 (acid-treated clay) as catalysts. The product ester, isopropyl myristate finds use in cosmetic and topical medicinal preparations where good absorption through the skin is desired. Filtrol-24 is the catalyst of choice, and the recommended operating temperature is 130°C with a pressure of 190 psig.     

Some soft measures for performance analysis: The “core” dimensions of expert system quality

The post-implementation evaluation of new technologies such as artificial intelligence, multimedia or parallel computing systems which are in operation is a much neglected problem. There is a lack of methods, techniques and tools for the practitioner to analyze the performance such systems. In earlier work, we have presented a framework and methodology that described a socio-technical approach for evaluating expert systems. In short, we determined the features and characteristics of expert systems that are most critical for their “implementation success”. This was the result of empirical evidence from a first-ever field study of expert systems in production. In this paper, specifically tailored to an audience of generalists, we retrospectively put our work into the framework of performance measurement and analysis. The end-result of our investigations is that we have definitional clarity as to how we may alternately evaluate such decision support systems.     

The role of N,N-dimethylaniline in the formation of titania gel monolith by sol-gel method

19950405 Our investigation on the rheological aspects such as gelling time, specific density, fluidity, viscosity and surface tension of the sol derived from titanium-tetra-isopropoxide (TTIP), water and isopropanol (i-PrOH) has been reviewed in the presence of n,n-dimethylaniline (DMA) as a drying control chemical agent (DCCA). Dry gels derived from DMA stabilized sol were found to be crack free with a larger surface area. The titania gel monolith obtained in the presence of DMA could be processed into rutile at much lower temperatures.     

Characterization of an ovarian cancer activating factor in ascites from ovarian cancer patients

Ascites from ovarian cancer patients contain potent growth-promoting activity toward human ovarian cancer cells both in vitro and in vivo. This activity is associated with rapid increases in cytosolic free calcium ([Ca2+]i) as a consequence of phosphoinositide hydrolysis. In this study, we describe the purification, characterization, and identification of an ovarian cancer activating factor (OCAF) from ascites of ovarian cancer patients. We have isolated OCAF by a combination of solvent extraction, silica gel chromatography, and TLC. Mass spectral analysis, phospholipase sensitivity, and gas chromatographic behavior of purified OCAF indicate that OCAF is composed of various species of lysophosphatidic acid (LPA), including LPAs with polyunsaturated fatty acyl chains (linoleic, arachidonic, and docosahexaenoic acids). However, OCAF is more potent than sn-1 palmitoyl, oleoyl, or stearoyl LPA in increasing [Ca2+]i in ovarian cancer cells. The ability of OCAF to alter [Ca2+]i is sensitive to the effects of lipoxidase, whereas the activity of sn-1 oleoyl, stearoyl, or palmitoyl LPA is not, suggesting that polyunsaturated bonds in the fatty acyl chain of OCAF may account for its increased ability to activate ovarian cancer cells. Furthermore, a sn-2 linoleoyl LPA generated by phospholipase A1 treatment of synthetic phosphatidic acid is much more active than are sn-1 palmitoyl, stearoyl, or oleoyl LPA in increasing [Ca2+]i in ovarian cancer cells. Taken together, these data suggest that the ability of OCAF to increase cellular calcium may reside in the structure and/or location of the fatty acyl chain of LPA. Purified OCAF, at concentrations similar to those present in ascites from ovarian cancer patients, was sufficient to induce proliferation of ovarian cancer cells, as indicated by thymidine incorporation, reduction of 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide, or colony formation. However, even at optimal concentrations of OCAF, proliferation was lower than that induced by FCS or ascites from ovarian cancer patients, indicating that, although OCAF may be a major regulator of ovarian cancer cells in vivo, it is not the sole mediator present in ascites, and it likely functions in concert with other growth factor activities.     

Disinfection performance of Fe(VI) in water and wastewater: a review.

Ferrate(VI) [FeVIO4(2-), Fe(VI)] has excellent disinfectant properties and can inactivate a wide variety of microorganisms at low Fe(VI) dosages. The final product of Fe(VI) is Fe(III), a non-toxic compound. The treatment by Fe(VI) does not give any chlorination by-products, which makes Fe(VI) an environmentally-friendly ion. The results demonstrate that Fe(VI) can inactivate Escherichia coli (E. coli) at lower dosages or shorter contact time than hypochlorite. Fe(VI) can also kill many chlorine resistant organisms, such as aerobic spore-formers and sulphite-reducing clostridia, and would be highly effective in treating emerging toxins in the aquatic environment. Fe(VI) can thus be used as an effective alternate disinfectant for the treatment of water and wastewater. Moreover, Fe(VI) is now becoming economically available in commercial quantities and can be used as a treatment chemical to meet the water demand of this century. This paper reviews the potential role of Fe(VI) as disinfectant in water and wastewater treatment processes.